![]() |
| fuel tank truck |
1. Engine at normal operating temperature flame, immediately put the net cooling water (there should be relieved thermostat thermostat), the cleaning agent is added to the cooling system;
2. Start the engine, running speed of 5 to 10 minutes, several times during the rotational speed can be changed in order to change the flow rate of the cleaning agent, flush system deposits;
3. Then turn off for 10 to 12 hours, so that the cleaning agent to react fully with the scale;
4. Restart the engine, medium speed for 5 to 10 minutes after the flame, let go of hot cleaning agents. Change into clean water continues to wash two or three times, until completion of the discharged water free of dirt;
5. refitted thermostat, cleaning is completed.
For tank truck, tank engine maintenance is very important as that the engine directly affects the performance of the tanker. Compared to other special features of the car is its distance traveled more often to run most of its use of the time traveling, and carrying capacity, especially for large tank trucks, eight oil tanker as the first four . Buying tank trucks customers are mostly very careful about tanker engine selection, because of how the performance of the engine determines the tanker performance is good or bad, in fact, engine maintenance is also essential, often the engine cooling system cleaning is especially important, because for a long time with the tanker engine cooling system will generate a lot of scale, this time it must be removed, otherwise serious consequences.

没有评论:
发表评论