The basic maintenance knowledge of fuel tank truck

Fuel tank of fuel tank truck elliptic cylindrical or trapezoidal structure surface cylindrical body, made of high-quality steel, the entire sub-tank single-chamber or multi-warehouse, the warehouse can be divided into chambers, the lower end of the middle partition with a through hole, the middle of each welding partakers warehouse or warehouse multi-warehouse, the warehouse can be divided into chambers, the lower end of the middle partition with a through hole, the middle of each bin welding partakers warehouse strengthen wave separator to reduce vehicle fuel tank body when driving impact and improve body rigidity. 

Fuel truck users should be familiar with the use of fire extinguishers, the vehicle is equipped with two fire extinguishers, in accordance with its instructions for inspection and maintenance. 

Instructions executed by automobile chassis, the chassis on a regular basis to go out of warranty repair service station, tank chassis and engine parts using a local home for. 
Fule tank truck oil pump use and maintenance, strictly according to maintenance manual execution. 
The use and maintenance of fuel tank truck refuel machine should be according to its instruction manual execution. 
Safety valves, filters net should be inspected regularly and cleaned. 
Reliable sealing, tanks and piping systems should be cleaned regularly, periodically check the piping system at each link coupling is good. 
And oil tank system should be cleaned regularly to ensure that the tank clean, inside and outside the oil hose connectors at both ends should always apply oil when disassembly easy and convenient, the tubing after each job is complete, clean, clean to ensure that the inner tube. 
Oil tank loading should not exceed the rated load mass, converted by oil density) 
To protect the seal ring, the medium through ball should not be too dirty to improve the life of the ball, each ball is not a temporary half-closed half-open state of the work, or easy to make the seal ring deterioration, driving each valve handle should be in the closed state. 
To prevent clogging of diesel filters, pump into the network should always be washable, affecting traffic. 
Breathing valve is in working condition, should be kept clean breathing valve, the valve spring are not free to replace, so as not to affect the absorption, the effect of deflation, when the breathing valve is blocked, there is a risk of causing distortion of the tank. 
Exhaust pipe, muffler damage, in order to prevent fuel tank truck fire accident, pipeline leakage, are not allowed to beat with a metal object oil car parts conductive or very bad break, in order to avoid the occurrence of Mars, the oil should be kept on board ready to fire equipment. 
Not use fire to dry, if the bottom of the pipe because of the profile is frozen, thawed or superheated steam to drive the truck into the conservatory is thawing. Must be used to avoid the pole is inserted into the wet land, refueling operations before the ride to tape should be grounded during the operation should always maintain good antistatic. 
Piping systems should be checked for leaks, before refueling operations, a ground wire is disconnected, if the exhaust pipe is damaged, then found the problem to be resolved before the job should pay attention to good ventilation, when you need to go to work inside the tank, the tank must be someone outside protection. 
Self-priming pump in the water if the water must be exhausted, according to relevant regulations the amount of oil in winter, with antifreeze broken pump. 

Hubei Changjie Special Purpose Vehicle Co. Ltd 
E-mail: cj802@urspv.com 
Tel: 0086-0722-3229933