2016年10月18日星期二

Knowledge of tires: radial tires

English: Radial Tire 
A radial tire is a tire in which the cords of the carcass are oriented at 900 in the direction of the center line of the tread (similar to the meridian of the earth). (Dump truck

Outside of the radial tire, there is also a belt made of steel wire hoop tight matrix. The fundamental difference between a radial tire and a conventional bias tire is that the 
carcass cords do not intersect, but that the layers are parallel to each other in the same direction as the meridian (meridian) of the earth. 

Compared with the bias tire, the meridian tire has the following advantages: 

① rolling resistance is small, reducing fuel consumption. ② tread wear. long life. ③ good cushioning, ride comfort. ④ anti-puncture ability, driving safety. ⑤ adhesion, 
off-road performance. ⑥ back to the moment is large, good handling stability. ⑦ driving noise. ⑧ light weight, large carrying capacity. 

The disadvantage of radial tires is thin sidewall, lateral stability is poor. Therefore, radial tires generally use low-profile structure, the sidewall deformation reduced, 
while tread widened to improve the braking and driving ability. (Dump truck

Meridian tires were developed by French Michelin in 1948 and were first introduced in Europe. Tire companies in the United States until after 1970, began extensive use. At 
present, the world's car tires have been basically the use of radial tires. 

Hubei Changjie Special Purpose Vehicle Co. Ltd 
Contact Name: Mr. Suan Yin 
E-mail: cj802@urspv.com 
Mobile phone: +8613886881673 
Tel: 008607223229933

没有评论:

发表评论