The notes during the use of fuel tank truck

Fuel tank truck in the factory before the general rigorous testing, tank forming workshop after the airtight test, in the subsequent vehicle assembly will be completed after a water test, the finished product out of the library will be tested and issued by the Technical Supervision tank Physical examination report. In general, the tank in the factory within a few years there is no quality problems, prone to problems are basically wearing parts. 5. This paper summarizes 17 problems that should be paid attention to in daily maintenance of fuel tank truck/oil tanker. 

A carrying fuel tank truck driving part of the popular argument is the car chassis. The general driver of this one more experts, the problem is the fuel tank truck installed after the pump power from the installation of the drive shaft, power take off, with these two devices we need special attention in the operation, improper operation force The device is scrapped. 
B, in order to prevent oil truck fire, in the exhaust pipe, muffler damage, pipeline leakage, bad or broken conductive metal parts are not allowed to beat the oil truck parts, so as to avoid Mars, oil tankers Should always be ready on fire equipment. In this case, 
C, if the tank under the sedimentation tank freezing, no fire baking, hot water can be used to melt or car into the greenhouse is thawed. In this case, 
D, fuel trucks before work, you must use avoid pole into the wet land, take the tape should be grounded, the operation process should always maintain a good static electricity. 
In this case, 
E, check out the fire extinguisher device, fuel truck users should be familiar with the use of fire extinguishers, and according to their instructions for inspection and maintenance. In this case, 
F, fuel tank truck operations, should check whether the pipeline system oil leakage, ground wire is disconnected, exhaust pipe is damaged, the problem should be resolved and then re-homework. In this case, 
G, the amount of oil should be implemented in accordance with the relevant provisions. In the winter, self-priming pump if the water must be put out of water to prevent frost broken pump body. 
H, when the need to enter the tank work, should pay attention to good ventilation, the tank must be someone outside protection. If necessary, wash with soap and water. In this case, 
I, the use and maintenance of oil pump, please strictly in accordance with its use of maintenance manual implementation, the car is equipped with instructions. In this case, 
J, the use and maintenance of tanker, in strict accordance with its instructions for the implementation of the car are equipped with instructions. In this case, 
K, out of oil slowly, no oil, please check the safety valve, filter net. These should always be checked and cleaned. In this case, 
L, tank and piping systems should be cleaned regularly. Regularly check the connection of the pipeline system is good, reliable sealing. In this case, 
M, in order to ensure that tank cleaning, tank and oil system should be cleaned regularly, both ends of the oil hose inside and outside joints should always smear oil, disassembly easy and convenient. After completion of each work of tubing, should be timely covered with the import and export of outer cover (block cover), oil hose at both ends (blocking cover)to ensure clean tube. In this case, 
N, oil loading should not exceed the rated load quality. (According to the oil density conversion). 
O, ball valve through the media should not be too dirty to protect the sealing ring and improve the life of the ball valve, the ball should not be half-open half-open state in the work, or easy to seal ring deterioration in the traffic in the handle should be in the ball Off state. In this case, 
P, into the pump network should be regularly unpicked to prevent the oil residue plug the filter, the impact of traffic. In this case, 
Q, should keep the breathing valve clean, so that the breathing valve in working condition, the valve spring is not free to change, so as not to affect the suction, deflated effect. When the breathing valve is blocked, there is a danger of deformation of the tank. 

Hubei Changjie Special Purpose Vehicle Co. Ltd 
Contact Name: Mr.Suan Yin 
E-mail: cj802@urspv.com 
Mobile phone: +86-1388-688-1673 
Tel: 0086-0722-3229933