Circuit and tires precautions of concrete mixer truck

Maintenance of concrete mixer truck circuit system is the core maintenance content, especially for concrete mixer truck used for more than three years. It is really critical for circuit system of concrete mixer truck conducting a thorough maintenance each year. If you find a sudden increase in fuel consumption, not normally, then you should go to the repair shop to check oil line and circuit of concrete mixer truck. Generally, if oil line and circuit fails, engine might increase injection of a mount of oil at work, which will naturally increase fuel consumption.

Some drivers will encounter rainy conditions causing concrete mixer truck engine difficult to start or inability. The biggest reason for this problem is from the ignition system leakage due to moisture generated. If problem above occurs, turn off the cooling and other mixer completely after a certain time, using a dry cloth to sweep boards and wires and other internal and external dry. Then go to repair shop to check. If it is because aging leakage, it must be promptly replaced.

1. Ensure the good quality of rims

With a good tire, but also to choose better quality wheels. We chose the rim, be sure to pay attention to its size and quality. In the clean-up of impurities on the rim (there must not be left in the debris inside), a week after the rim coated with soapy water, then a combination of the tire. In this case, you also need a suitable cushion tires, tires and wheels in order to reduce wear.

    2. To be a "balancing" is very critical

 Having driven concrete mixer truck, people know that it needs be done "banlancing" when puncturing tires. But for truck,whether there is any need to do "balancing" for tires, most people think it should be considered unnecessary. This is wrong, from the production process is concerned, rims and tires in the production process is not a hundred percent the same density, leading to its various parts have different centrifugal force at high speed, the tires passed, resulting in tire wear uneven; passed the body, causing trembling mixer running. For driving comfort and safety; reduce operating costs, small advice, after each tire repaired,do give your tires a "balancing"!

3. Tire pressure standard is important and scientific and reasonablely inflating tires reduces wear

Each tire is marked on their tire pressure values ​​for the prevalence of domestic overloading, unreasonable inflated phenomenon, which is not taken. Tire pressure is too high or too low, it will lead to increased tread wear, even a puncture. We can be increased by 5% to 10% in accordance with the standard tire pressure, and according to a reasonable case load,pressure for each tire of each axis. It is noteworthy that, on the same axis of the tire, the tire pressure must be consistent. In everyday driving the process,
wants to be always check to ensure that the normal use of tire of concrete mixer truck.

Since the resistance of the tire during operation and the role of the ground, leading to increased tire temperature, tire pressure increased, likely to cause a puncture. Now the
market is more popular to add nitrogen for tires, Hubei Changjie thinks this is a good solution.

 NOTE: During tire inflation process, we must do its protection work for this is a very dangerous thing.

4. Purchasing concrete mixer truck, it is important to pay attention to tire specifications

Truck tire purchase, pay attention to the type marked on it, simple as: 1200R20 ( There are many marked on the tire, such as tire pressure, speed, etc. For reasons of space, not repeat them here), 1200 is a tire transverse surface 12 inches; R is the meridional structure, typically all steel; the hub assembly 20 is 20 inches. Purchase, be sure to pay attention to their own heavy-duty mixer, with road and so the tire purchase. Here, the small series suggest that cardholders in the economic circumstances permit try to choose good tires, not only the safety and after-sale protection, mixer driving safety and cost will therefore fall a lot.

5. It is essential to do a good release before tires moving on the road

After buying back tire, vehicle driver friends may not pay attention to the faithful, it is mounted directly on the car use. Wait until after the use of a flat tire, only to find, inner tubes and tire firmly stick together. After the exhaustion of tremendous efforts, and finally disconnect the tube - is only part of the inner tube, there are still some sticking to the tire can not pull it down. This would be before we tire is mounted on concrete mixer truck, the tire apart and see approach is now Cape sprinkle talcum powder isolation between the inner tire.