Sanitation car sweep disk speed and sweep angle adjustment and with the way

Sanitation vehicles are generally the mode of operation by the high-speed rotation of the sweep, the ground garbage collected together to recover to the trash, the sanitation vehicles sweep the top of the brush is composed of plastic bristles and steel wire, plastic bristles and steel wire long-term The ground will have some wear and tear rotation, then you want to extend the life of the brush, brush must be based on the degree of abrasion in time to adjust the sweep speed and sweep disk angle with a reasonable mix. (road sweeper truck)

Sweep speed: the faster the faster scrubbing brush wear, speed too slow will affect the effect of cleaning garbage;
Sweep angle: the smaller the angle of the brush scrubbing wear faster, the inclination will affect the cleaning effect is too large;

Hubei Chang Jie Special Purpose Vehicle Co., Ltd. will sweep the speed and sweep pan tilt adjustment and collocation way is as follows:

Sweep speed adjustment: one-way throttle is installed on the electric control operation platform of the vehicle, and the speed switch of the sweeper is placed in the mid-range and the throttle knob of the D14 is adjusted. When the medium speed is rotated, 80r / min; Sweep speed switch placed in low-grade, adjust the solenoid D13 throttle knob below, so that low-speed rotation of the sweep disk, sweep disk speed of about 60r / min.
Adjustment of the front and rear angle: Loosen the locking nut on the adjusting screw and adjust the length of the screw so that the vertical direction of the sweep plate is tilted 4-6 degrees, and then lock the locking nut on the adjusting rod. Note the adjustment after the completion of the screw should be coated with calcium-based grease to prevent thread corrosion, the impact of the next adjustment, after adjustment to pay attention to brush replacement problem.
Sweep left and right angle adjustment: loosen the sweep angle adjustment bolt, the sweep disc tilted 2-4 degrees, and then lock the nut.
(Front left and right front cleaning device): first before the sweep lift cylinder to the longest, and then release the adjusting rod of the lock nut, so that along the junction of the slide outside the slide or the next (To extend the length of the lower part of the screw), reduce the pan height to the appropriate position, and then tighten the lock nut. Second, and then adjust the threaded barrel, adjust the brush brush ground pressure, so that the pressure brush sweep touch appropriate. 
(After the rear, right after the cleaning device): first after the sweep lift cylinder extended to the longest, appropriate to adjust the chain length and adjust the chain link up and down, you can reduce the sweep height and adjust the sweep Brush ground pressure. (road sweeper truck)

For more information, please contact us. You can also visit our official website: www.chinatankertruck.com for more selections on interested products and inquiry some. We have foreign trade specialists for your need and answer your question one by one, completing all aspects problems during the purchase process. Hubei Chang Jie Special Vehicle Co., Ltd. specializes in the special automobile market around the world, mainly in Southeast Asia, the Middle East, Africa, South America and other countries and regions, professional export all the matters so that you can safely and easily buy favorite products from us. Thank you for your reading and attention!

Hubei Changjie Special Vehicle Co. Ltd 
Contact Name: Suan Yin
E-mail: cj802@urspv.com 
Whatsapp: +8613886881673
Tel: +(00)867223229933