Fuel tank truck's brake pads are wearing parts, is the fuel tank truck's "fuse", if it is a problem, the fuel tank truck will not guarantee Dangerous, only dangerous, to what extent should be replaced? This is based on the car environment and driving habits to decide, usually about 60,000 km driving is necessary to replace, this is only a rough estimate, in order to traffic safety, we still have to accurately grasp this standard - judging from the thickness of the brake pads up.
A new brake plate thickness is generally around 1.5cm, with the use of friction in the thickness will gradually thinning. We built , When the naked eye to see the thickness of the brake pads have been left 1/3 of the original thickness of about 0.5cm, the driver (tanker driver Should pay attention to the problem) will increase the self-test frequency, ready to replace. Of course, individual models due to wheel design reasons, do not have the naked eye to view the conditions, need to dismantle the tires to complete, when the tire (fuel tank truck tires easy to wear phenomenon) after the demolition, we see each brake pads on
both sides of a protrusion Logo, the thickness of the sign in the two or three millimeters, which is the thinnest brake plate replacement limit, if the thickness of the brake pads have been parallel with this flag, this time must be replaced. So when the brake pads close to the thickness of the sign when the driver to prepare a new brake pads, observe, ready to replace, so as to avoid serious consequences caused by negligence.
Hubei Changjie Special Purpose Vehicle Co. Ltd
Contact Name: Mr.Suan Yin
E-mail: cj802@urspv.com
Mobile phone: +86-1388-688-1673
Tel: 0086-0722-3229933
没有评论:
发表评论