The maintenance of water truck

1. Sprinkler water truck chassis and supporting pump maintenance should be according to the corresponding instruction manuals. 
2. The vehicle shall be required to get running according to car instruction manual before using. 
3. Long distance transition and transportation, front and rear of the vehicle shall be stationary skid around and left around 200mm above the void, if the self-transitions should generally be before the nozzle and after the sprinkler removing prevent loosening loss. 
4. Always check the fluid out of each hole, mouth or without clogging found clogged should be cleaned up promptly. 
5. The class work is completed, it should be cleaned of oil, pipeline reel neat, clean up the site, close the latch. 
6. The vehicle is unused for long periods or winter storage should be exhausted tank, pump and internal piping than water should be stored in a parked car shed, Wipe clean, to avoid exposure to rain. 
Sprinkler Chassis cleaning: chassis closest to the ground sediment must have been a big mess. So before any other parts are clean, we need 10 tons sprinkler chassis conduct a thorough cleaning. After a muddy road, 10 tons sprinkler plate front and rear hubs will be covered with small yellow mud and sand. When cleaning required water cannons into the bottom, water cannons spray direction toward the hub plate hub plate direction, so as to effectively remove the attachment of the hub plate. 
Clean sprinkler paint: complete chassis clean, we can be 10 tons sprinkler water truck body cleaning. First, rinse water from top to come down to earth paint surface, the purpose of the vehicle body is washed away large volumes of sand. Towels from the roof to the bottom of the vehicle gently wipe. Please note that the closer to the chassis paint more carefully wipe, avoid car paint scratches sand. 

Hubei Changjie especial PurposeVehicle Co. Ltd 
E-mail: cj802@urspv.com 
Tel: 0086-0722-329933