Explain the side-loading compressed garbage truck

Side-mounted compression garbage truck is a garbage truck is a side-mounted garbage truck and compressed garbage truck structure. 

The working principle of side - loading compressed garbage truck 
Side compression garbage truck is through the rod to enhance the trash automatically into the garbage, and to the rear of the compartment to promote the extrusion of garbage, to 
achieve the purpose of compressed garbage, compression principle is the use of mechanical, electrical, hydraulic linkage control system, computer control and manual operation System, through the filling device and shovels and other devices to achieve garbage into, crushed or crushed, and refuse to squeeze into the compartments and compaction and shirk. Its characteristics are: compression ratio, high loading capacity: the maximum crushing pressure of 12 tons, the load is equivalent to tons of non-compressed garbage with two and a half times. 

Compression of Compressed Garbage Truck and Compressed Garbage Truck 

Side loading compression type garbage truck and after loading compression garbage truck of the biggest difference is the loading method. The former is side-mounted, through the bar to enhance the trash automatically into the garbage, and to promote the rear compartment to squeeze garbage, to achieve the purpose of compressed garbage. The latter is from the back through a direct bucket or manually put into the garbage, and push the crush to the front of the compartments, to achieve the purpose of compression. In this case, In this case, Two compression garbage truck unloading methods are the same, are pushed through the push plate to achieve the purpose of unloading. Can be trash roadside trash collection into the garbage compartment, after the compression device will be compressed garbage truck into a block of transportation, saving the garbage volume, speed up the efficiency, no secondary pollution. 

Side mounted compression garbage truck use 
1, to adapt to different specifications of the trash automatically feed to the compartment 
2, car roof door automatic drive opening and closing; 
3, the back door automatic rotation drive opening and closing; 
4, push the board inside the garbage can be squeezed to improve the amount of garbage loaded; 
5, parallel carriage lifting, docking with a variety of models of compression vehicles, garbage inside the compartment to push compressed compression mechanism compression to avoid the secondary pollution during transport. 

Hubei Changjie Special Purpose Vehicle Co. Ltd 
Contact Name: Mr.Suan Yin 
E-mail: cj802@urspv.com 
Mobile phone: +86-1388-688-1673 
Tel: 0086-0722-3229933